| Customization: | Available |
|---|---|
| After-sales Service: | Immediately Installment Instructions. |
| Warranty: | / |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description of Scaffolding Base JackScaffolding base jack which is the necessary parts in every scaffolding system to adjust the scaffold level whenever the floor base not flat, special-shaped, etc, which provide a good solution for a construction project, bridge, tunnel, civil building, etc.
The scaffolding base jack (screw jack) is used as a starting base for a scaffold, which provides stability by adjusting the base jack nut on uneven ground.
The head base jacks are used as the base for scaffolding bays with all kinds of shoring posts and shoring scaffolding system, playing the role of top and bottom support.
If the building is built on expansive soil, therefore, with regular movement, a scaffold screw jack can replace concrete piers between solid wood columns and girders that support the floor joists.
A scaffolding base jack is a metal support column that can be adjusted to make the floor level. It consists of two heavy steel tubes, one inside the other. The inner tube is threaded and adjusted up and down by turning a large wing nut. Screw jacks are fixed with nails to the underside of the girder and to wooden blocks on top of the concrete wharf.
1. In this process a hydraulic jack and a short column are used to support the floor.
2. Use hammers, nail pullers and sledgehammers to remove existing supporting posts and nails.
3. Place the scaffolding adjustable screw jacks under the beams and the wooden blocks on the concrete piers in the middle.
4. Adjust the scaffolding screw base jack so that the top and bottom panels are flush with the top and bottom wood surfaces.
5. Drive the 16 -penny nail through the hole in the plate and into the wooden frame.
6. Lower the hydraulic jack and transfer the floor load to the new scaffolding screw jack.
7. Adjust the adjustable base jack scaffold up and down to make the surface smooth.
| Item | Size | Base Plate |
| Solid Base Jack | 30*600mm | 120*120*4/5mm |
| Solid Base Jack | 32*600mm | 120*120*4/5mm |
| Solid Base Jack | 34*600mm | 120*120*5mm |
| Solid Base Jack | 30*400mm | 120*120*4/5mm |
| Solid Base Jack | 32*400mm | 120*120*4/5mm |
The scaffolding base jack is a crucial component for supporting scaffold structures. Typically located at the bottom of the scaffold, it is responsible for adjusting and supporting the height of the scaffold, ensuring the overall stability and balance of the structure. These jacks are usually made of metal and can be adjusted in height by rotating the threaded rod. They support the scaffold through their sturdy base. Workers can adjust the scaffold according to the needs of the work site to ensure safety and stability. These base jacks play a vital role in construction projects, providing workers with a safe and stable platform to efficiently carry out their work.
In the realm of scaffolding, we offer a diverse range of base jacks for both sale and rental. Typically, there are two predominant types of base jacks widely utilized in the industry.
){kind=link}