Customization: | Available |
---|---|
After-sales Service: | Please Send Us Message for Further Details |
Warranty: | / |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
European Standard Heavy Duty Steel Prop for Shoring as the most popolar prop serie among all TECON telescopic props, is designed and manufactured according to EN1065 standard. The sizes are available from 1500mm to 5000mm with working bearing load limits from 20kN to 30kN.
Feature
* Convenient erection with the assistant of tripod
* 20kN(D class) & 30kN(E class) at different open lengths for your selection
* Anti-dislocation of inner tubes flying out of outer tube
* 100mm safe zone design on the top of inner tube avoiding any injury on the hands of users
* Hot dip galvanization treatment prevent the prop from corrosion, other treatment like painting and electro galvanization are also available
* According to EN 1065 standard
Here are some instructions for installing an adjustable shoring jack:
Select lumber: Choose a 4 in x 4 in (4x4) lumber based on the construction documents.
Measure: Determine the vertical height needed for the shoring jack assembly.
Cut the lumber: Subtract 10 in from the measured height to get the length of the 4x4.
Insert the lumber: Put the 4x4 into the square tube of the shoring jack.
Nail the lumber: Install four 2-1/4 in 8d nails into the holes in the square tube walls.
Center the jack: Make sure the shoring jack is centered under the horizontal member it will support.
Adjust the jack: Turn the adjusting screw until the 4x4 is firmly supporting the horizontal member.
Verify the jack: Use a level to make sure the 4x4 is vertically plumb and centered under the horizontal member.
Shoring posts help distribute the weight of construction materials evenly across a structure. This reduces the risk of uneven weight distribution, which can lead to structural failure.
Size 3.5mtrs | height 10-11ft |