Product Description
The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit.
From the French word for ribbon, lanière, a lanyard is simply a strap or cord with one end attached to an object (like a badge holder) and the other end usually looped around the neck of the wearer.
Product Parameters
| Height in feet |
Length in inches |
Height in millimeters |
Length in millimeters |
| 5'3'' |
30" |
10 mm, 20 mm, 25 mm |
760 mm |
| 5'5'' |
32" |
10 mm, 20 mm, 25 mm |
810 mm |
| 5'7" |
34" |
10 mm, 20 mm, 25 mm |
860 mm |
| 5'9" |
35.4" |
10 mm, 20 mm, 25 mm |
900 mm |
| 5'11" |
35.4" |
10 mm, 20 mm, 25 mm |
900 mm |
Installation Instructions
How to put on the safety belt:
1.Take the harness out from the packing, holding it by the dorsal tightening ring.
2.Wear the harness by slipping on the shoulder straps one after one, taking care not twist them.Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks.Pull one and the other thigh strap through the crotch and latch each strap.Make sure not to cross the straps.
3.Attach the chest strap and adjust its tension to hold the shoulder straps centered on each shoulder.Check that the belts would not be wrapped up themselves.
4.Adjust the harness by pulling and releasing the free end of the belt, so that the belts would be well tight and at the same time would not prevent free movements.
5.The adjustment should be effected by checking that the dorsal ring would be positioned between the shoulder blades or frontal tightening connector would be positioned at the height of the breastbone and that the sitting belt would be correctly positioned.
6.For the frontal tightening, the connector of the two back eyes should be in compliance with the norm en362, always connected to both eyes and locked.It is always recommended its use, even if you are using the dorsal tightening ring.
FAQ
Q1. Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 2-5 days, mass production time needs 1-3 weeks for order quantity more than one container
Q3. Do you have any MOQ limit ?
A: Low MOQ, 1PC for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: Train and sea shipping both can provide. Shipping time depends on distance.
Q5. How to proceed an order ?
A: Firstly let us know your requirements or application.
Secondly We offer you the ideal products and price .
Thirdly we strike the deal if everything goes well.
Fourthly We arrange the production.
Q6. Is it OK to print my logo and change package?
A: Yes. Please inform us formally before our production.we need comfirm with you the design.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.1%. We will do several inspection before we send to you.
Detailed Photos
Audited Supplier 
){kind=link}